uncoated disc with radial leads description point-matched disc thermistor with bare lead-wires. features ? low cost solid-state sensor ? resistance tolerances down to 2% ? high sensitivity to changes in temperature ? suitable for temperature measurement, control and compensation ? excellent mechanical strength ? wide operating temperature range: -58f to 302f (-50c to 150c) ? suitable for pcb and probe mountings ? available in a wide range of material systems ? also available with epoxy coating ? available on tape and reel to eia rs-468a for automatic insertion ntc thermistors types rl35/40/45 a mphenol advanced sensors
types rl35/40/45 specifications options ? other resistances and tolerances at other temperatures available. ? resistance tolerance codes: g = 2% C j = 5% C k = 10% C l = 15% C m = 20% ? alternative lead lengths, lead materials, insulations ? the - k suffix is the same as the di suffix in earlier catalogs type ro@25c material beta a b d t number w systems 25/85 in mm in mm (mw/k) (sec.) rl3504-31.2-73-k 50 d7.3 3468 0.370 9.40 .130 3.30 7.5 45 rl4006-29.7-85-k 50 d8.5 3772 0.430 10.92 .150 3.81 9.0 40 RL4005-116-95-K 200 d9.5 3965 0.430 10.92 .140 3.56 9.0 40 rl4004-175-97-k 300 d9.7a 3972 0.430 10.92 .130 3.30 9.0 40 rl4005-2670-140-k 5k d14.0 4615 0.430 10.92 .140 3.56 9.0 40 rl4005-5267-150-k 10k d15.0 4728 0.430 10.92 .140 3.56 9.0 40 rl4504-3.28-59-k* 5 d5.9 3096 0.480 12.19 .140 3.56 10.0 60 diameter refer to table 0.25 in (6.4 mm) 1.5 in (38 mm) min b thickness refer to table 24 awg tinned copper for rl 35s 22 awg tinned copper for rl 40s and rl 45s aas-920-415a-04/2014 www.amphenol-sensors.com ? 2014 amphenol corporation. all rights reserved. specifcations are subject to change without notice. other company names and product names used in this document are the registered trademarks or trademarks of their respective owners.
|
